To Next Page
G
Gary BryantSep 23, 2025
Why is my White Rodgers Heat Pump cooling cycle too short?
- SSteven CameronSep 23, 2025
The cooling cycle rate for the White Rodgers Heat Pump is fixed and cannot be adjusted. Contact a local service person for suggestions.
Why is my White Rodgers Heat Pump cooling cycle too short?
The cooling cycle rate for the White Rodgers Heat Pump is fixed and cannot be adjusted. Contact a local service person for suggestions.
What to do if my White Rodgers Thermostat has no heat, no cool, or no fan?
If your White Rodgers Thermostat isn't producing heat, cool air, or running the fan, the issue might stem from a blown fuse, a tripped circuit breaker, or the furnace power switch being off. It could also be due to a loose furnace blower compartment door. Try replacing the fuse or resetting the breaker. Ensure the furnace power switch is set to ON. Also, check that the furnace blower compartment door or panel is correctly installed to engage the safety interlock or door switch.
What to do if my White Rodgers 1F95-391 has no heat?
If your White Rodgers Thermostat is not producing heat, possible causes include an unlit pilot light, the system button not set to HEAT, a loose connection, or a furnace lock-out condition. Ensure the pilot light is lit. Set the SYSTEM button to HEAT and raise the temperature above the room temperature. Verify that the thermostat and system wires are securely attached. If the heat works intermittently, it's possible that the heating system requires service.
How to fix White Rodgers 1F95-391 Thermostat with no cool air?
If your White Rodgers Thermostat isn't cooling, make sure the system button is set to COOL and the temperature is set below room temperature. Also, check that all thermostat and system wires are securely attached. If the issue persists, the cooling system may require service or the thermostat may need replacement.
Why my White Rodgers Thermostat does not follow program?
If your White Rodgers Thermostat isn't following the set program, it could be due to incorrect AM/PM settings in the program or on the clock. A voltage spike or static discharge may also cause this issue. Verify the current clock and program settings, paying close attention to AM/PM designations for each time period. If a voltage spike or static discharge occurred, use the reset operation.
Why is my White Rodgers Heat Pump not working?
If your White Rodgers Heat Pump is not working (no heat, cool, or fan), check these items: 1. Replace any blown fuses or reset tripped circuit breakers. 2. Ensure the furnace power switch is turned ON. 3. Make sure the furnace blower compartment door or panel is correctly installed to engage the safety interlock or door switch.
What to do if my White Rodgers 1F95-391 displays CHCK PAD?
These service indicators on your White Rodgers Thermostat can be reset or modified in the service button menu, consult page 8 for instructions.
What to do if White Rodgers Heat Pump has no cool air?
If your White Rodgers Heat Pump isn't cooling, make sure the SYSTEM button is set to COOL and the temperature is set below room temperature. Also, check that all thermostat and system wires are securely attached.
Why does my White Rodgers 1F95-391 heat, cool, or fan run constantly?
If your White Rodgers Thermostat's heat, cool, or fan runs constantly, it could be due to a short in the wiring, the thermostat itself, or the heating/cooling/fan system. Also, check if the fan button is set to FAN ON. Check all wire connections to ensure they are not shorted or touching. Make sure no bare wire is exposed from under the terminal screws. You may also try resetting the thermostat.
How to fix White Rodgers Heat Pump thermostat that doesn't follow program?
If your White Rodgers Heat Pump thermostat isn't following the program, check the current clock and program settings, paying close attention to AM/PM designations for each time period. If a voltage spike or static discharge occurred, use the reset operation.
Details electrical, thermal, and system compatibility data for the thermostat.
Essential safety warnings and cautions for thermostat installation and use.
Information on the thermostat's reset switch and E2/P switch functions.
Configures system type (MLTI STG/HP) and heat pump compressor count.
Verifies fan, heating, cooling, and emergency heat modes.
General| Brand | White Rodgers |
|---|---|
| Model | 1F95-391 |
| Type | Thermostat |
| Display | Digital |
| Programmability | 7-Day Programmable |
| Voltage | 24V AC |
| Wi-Fi Capability | No |
| Power Source | 24VAC |
