White's Spectra V3i - Wireless

pg 29
Complete Guide to Spectra V3
i
®
Wireless Headphones –
Select Wireless Headphones and press ENTER.
• Press ENTER to Enable “X” in box” (turn on) Wireless Headphone transmitter.
• Press Wireless Headphone Power Button to turn ON Wireless Headphone. You will hear
the up tone.
• Note: The Spectra and Spectra Wireless headphone are preset for automatic CONNECT on channel 4,
no further connection steps are initially required. Turn ON/OFF wireless headphone Power Button
automatically selects between the Spectra’s built in Speaker, and the wireless Headphones. However, once a
different channel has been selected, a Connect sequence is then required to Enable the Wireless Headphones.
• If there is signifi cant wireless channel interference, the built in speaker will occasionally sound. A different
wireless channel should be considered.
• Connect Sequence “AFTER CHANNEL CHANGE” described below – MENU/TAB to Connect, Press
ENTER, Hold Power button on Wireless Headphone, beep-BEEP, beep-BEEP, and display
prompts indicates connection made, squeeze and release trigger to search
with wireless activated.
• Selecting a different wireless channel is provided to overcome any area wireless interference.
Wireless Headphone - Quick Connect
• Select Audio or Zoom Audio
• to Wireless Headphone. Press
• Press to enable x
• Press and hold headphone power button.
• Headphone is connected within fi ve
seconds
when you hear... .
Headphones automatically turn off with the detec-
tor. To manually turn OFF headphones, press head-
phone power button.
You will hear
The metal detector speaker will
connect within ten seconds.
Audio
Audio Zoomed
SpectraSound System comes factory pre-connected (Channel 4)
allowing the “Quick Connect Sequence”.
Tips ...
Tips ...
• Trigger to search.
B
B
A
A
S
S
I
I
C
C
M
M
E
E
N
N
U
U