To prevent injury to the user or other people and property damage, the
following instructions must be followed.
Incorrect operation due to ignoring of instructions may cause harm or
damage. The seriousness is classified by the following indications.
Safety precautions
1. Connect with the power properly.
Otherwise, it may cause electric
shock or fire due to excess heat
generation.
2. Do not modify power cord length or
share the outlet with other
appliances. It may cause electric
shock or fire due to heat
generation.
3. Always ensure effective earthing.
No earthing may cause electric
shock.
4. Disconnect the power if strange
sounds, smell, or smoke comes
from it. It may cause fire and
electric shock.
5. Keep firearms away. It may cause
fire.
6. Do not operate or stop the unit by
switching on or off the power. It
may cause electric shock or fire due
to heat generation.
7. Do not operate with wet hands or in
damp environment. It may cause
electric shock.
8. Do not allow water to run into
electric parts. It may cause failure of
machine or electric shock.
9. Do not drink water drained from air
03
Contents
04
Safety precautions
6.6 How the air conditioner works...................................38
- Automatic operation
- Cool/heat and fan only operation
- Dry operation
- Airflow direction adjustment
- Sleep mode
- Timer operation
- Optimal operation
6.7 How to use the indoor unit......................................................42
- Adjusting air flow direction
- Adjusting the vertical air flow direction (up/down)
- To set the horizontal air flow direction (left/right)
- To automatically swing the air flow direction (up/down)
6.8 Manual operation....................................................................44
07. Maintenance....................................................................................45
08. Operation tips.....................................................................................47
09. Solution for problems.........................................................................49
10. Technical specifications........................................................................50