White SuperLock - THREAD GUIDE POLE; ADJUSTING MACHINE BALANCE

7,
THREAD
GUIDE
POLE
Extend thread guide pole
to
its highest
point.
Place
threads on spool pins and
draw
them
through the guides
from
rear
to
front.
8.
ADJUSTING MACHINE BALANCE
To compensate
for
any uneveness
on your
working surface, the
machine is
fitted
with
an adjustable
rubber stud.
(1)
Push release
lever towards
you to
open
side cover.
(2)
Adjust
the
height of the
rubber stud
by
turning
the screw.
To
lower the
rubber
stud,
turn
the
screw anti-clockwise.
Rubber
stud
6