White X-17 - Before Sewing Setup; Power Connection and Speed Control; Sewing Lamp Bulb Replacement

BEFORE
SEWING
—4—
1.
Fit
the machine plug into
the machine.
2.
Plug the
machine to
the
power
supply.
3. Sewing
speed can
be
varied
by
the speed controller.
1.
Remove or install bulb from
inside of face cover.
2.
Open face
cover in
direction
of
arrow.
3.
Remove bulb
by
unscrewing
it counter clockwise.
4,
Install
a
new
bulb by
screw
ing
it
in
clockwise.
5.
Use
a
screw
type
bulb
with
120V/15W,
(Max)