Whiteley Electronics PETS-2 - Default Chapter; Table of Contents

Page 4 of 40
Issue 2
13/12/99
PETS-2 Crossing Telephone System
QUICKFIX INSTALLATION HANDBOOK
4
CONTENTS
1. INTRODUCTION 7
2. EQUIPMENT SUPPLIED 7
2.1 Signal Box Kit (WEL part A35154) 7
2.2 Level Crossing Kit (WEL part A35155) 8
3. ACCESSORIES 8
4. OUTLINE DESCRIPTION 9
4.1 PETS 2 - Enhancements 10
4.2 Signal Box Unit 11
4.2.1 Item 1 - Connection Plate 11
4.2.2 Item 2 - Connector Retention bracket 12
4.2.3 Item 3 - Frame retention bolts 12
4.2.4 Item 4 - Right hand access plate 12
4.2.5 Item 5 - Front panel 12
4.3 Level Crossing Unit 13
4.3.1 Item 1 - Connection Plate 14
4.3.2 Item 2 - Connector Retention bracket 14
4.3.3 Item 3 - Frame retention bolts 14
4.3.4 Item 4 - Right hand access plate 15
4.3.5 Item 5 - Front panel 15
4.4 Inside the case 15
4.4.1 Item 6 - Transmission Card (A33837) 16
4.4.2 Item 7 - Line cards (A33838 - Level Crossing), (A35173 - Signalbox) 16
4.4.3 Item 8 - CPU card (A33839 - Level Crossing), (A35176 - Signalbox) 16
4.4.4 Item 9 - Power Supply & Ringer Card (A33898) 16
4.4.5 Item 10 - Fuseholder +12V (fused) 16
4.4.6 Item 11 - Earth stud for wrist strap 16
4.4.7 Item 12 - Card Pullers 16
4.4.8 Item 13 - Voltage selection link (refer to section 5.8.1) 17
5. INSTALLATION 19
5.1 Installation tools 19
5.2 Unpacking the equipment 19
5.3 Preparation 19