2016 Edition 1
Page 15
WHYTE Service Manual
5.2: WHYTE INTER-GRIP SEAT CLAMP
5.3: GENERAL WHYTE LUBRICATION
For the correct lubrication regime and maintenance of all parts on a Whyte bicycle, please
refer to the specific component manufacturers detailed instructions bundled with this man-
ual or for further information visit the specific manufacturers website.
6.0: TORQUE SETTINGS
Torque explained: If no suitable Torque Wrench is available a Torque of 5 lbf.ft can be obtained by ap-
plying a force of 5lb, with a Spring Balance, to the end of a spanner, 1 Foot in length.
IMPORTANT: For all other torque settings, refer to the specific manufacturers information
bundled with this manual, or alternatively, refer to the specific manufacturers website for
further information.
7.0: NOTES
Figure 8: Capscrew Lubrication
Item Lubricant
Lubrication
Interval
1
SKF LGEP2 or Castrol Spheerol AP3 or Finish
Line Teflon White Lithium Complex grease
Once a Month
Description
M6 x 30mm
Capscrew
To Next Page
Loading...
