Page 3 2016 Edition 1
Table of Contents
1.0 Introduction
2.0 Geometry:
2.1 G-160 Works & G-160 RS
2.2 T-130-C Works & T-130-C RS. T-130 RS, T-130 S & T-130 SX
Women’s Spec
2.3 T-129 SCR, T-129 RS & T-129 S
3.0 Preparations for riding:
3.1 Making Adjustments
3.2 Whyte Inter Grip Seat Clamp Adjustment
3.3 Set up of Fork
3.4 Set up of Rear Damper
3.5 Suspension Tuning Log
4.0 Safety.
5.0 Lubrication:
5.1 Whyte Inter Grip Seat Clamp
5.2 General Lubrication
6.0 Servicing the Rear Suspension:
6.1 Removing the Rear Shock and Swinging Arm
6.1.1 From G-160
6.1.1.1 Remove the Rear Shock only.
6.1.1.2 Remove the other rear suspension parts.
6.1.2 From T-130-C, T-130 or T-129
6.1.2.1 Remove the Rear Shock only.
6.1.2.2 Remove the other rear suspension parts.
6.2 Stripping and Re-assembling Rear Suspension Bearings
6.2.1 Extraction of Bearings
6.2.2 Insertion of Bearings
6.2.3 Re-Assembly of Shield Washers / Spacers
6.3 Re-assembling the Rear Suspension
6.3.1 Re-Assembly of the Rear Suspension (G-160)
6.3.1.1 Re-assemble the other rear suspension parts.
6.3.1.2 Re-assemble the Rear Shock into the Frameset.
6.3.2 Re-Assembly of Rear Suspension (T-130-C, T-130 or T-
129)
6.3.2.1 Re-assemble the other rear suspension parts.
6.3.2.2 Re-assemble the Rear Shock into the Frameset.
To Next Page
Loading...
