Need help?Do you have a question about the widmer E-3 and is the answer not in the manual?
Adjusts stamping pressure via a screw/knob mechanism to fine-tune imprint intensity for different paper types.
Steps to detach the existing counter seal from the hammer assembly for replacement.
Instructions for attaching a new counter seal using adhesive for proper alignment.
Verifying the imprint quality after seal replacement and making minor adjustments.
Fine-tuning print impact through the ribbon using a potentiometer after removing the bottom cover.
Procedure for setting the current date using the machine's wheels.
Method for setting the starting number for sequential printing.
Explanation of the security lock's function and operational requirement to enable stamping.
Steps for replacing the ink ribbon on the embosser.
Independent adjustment of stamping pressures for different impressions.
Fine-tuning the pressure for the seal embossing mechanism via potentiometer.
To Next Page
General