EN
WIKA operating instructions pressure gauge, model 2, copper alloy12
14306500.01 09/2019 EN/DE
4. Transport, packaging ... / 5. Commissioning, operation
4. Transport, packaging and storage
4.1 Transport
Check the instrument for any damage that may have been caused by
transport.
Obvious damage must be reported immediately.
CAUTION!
Damage through improper transport
With improper transport, a high level of damage to property
can occur.
When unloading packed goods upon delivery as well as
during internal transport, proceed carefully and observe
the symbols on the packaging.
With internal transport, observe the instructions in chapter
5.2 “Packaging and storage”.
4.2 Packaging and storage
Do not remove packaging until just before mounting.
Keep the packaging as it will provide optimum protection during trans-
port (e.g. change in installation site, sending for repair).
Permissible conditions at the place of storage:
Storage temperature: -40 ... +70 °C
Avoid the following inuence:
Mechanical vibration, mechanical shock (putting it down hard)
5. Commissioning, operation
Before installation, commissioning and operation, ensure that the appro-
priate instrument has been selected in terms of scale range, design and
To Next Page
Loading...
Need help?
General
