EN
WIKA operating instructions pressure gauge, model 2, copper alloy18
14306500.01 09/2019 EN/DE
6. Faults / 7. Maintenance and cleaning
and disposal” and 5 “Commissioning, operation” must be observed.
Optical changes without limitation of the function
If the instrument is exposed to intensive UV radiation, the colouring of
the dial printing may change.
-
ments.
7. Maintenance and cleaning
Personnel: Skilled personnel
7.1 Maintenance
The instruments are maintenance-free.
requierements for calibration apply.
disconnected from the process to check with a pressure testing
device.
Repairs should only be carried out by the manufacturer or, following
skilled personnel.
EN 837-1, the instrument function must be checked.
To Next Page
Loading...
