EN
WIKA operating instructions pressure gauge, model 2, copper alloy 9
14306500.01 09/2019 EN/DE
that the operating personnel are regularly instructed in all topics
know the operating instructions and, in particular, the safety instruc-
tions contained therein.
that the instrument is suitable for the particular application in accord-
ance with its intended use.
On the wetted parts of the instrument, small residual amounts
of the adjustment medium (e.g. compressed air, water, oil)
can adhere from production. With increased requirements for
technical cleanliness, suitability for the application must be
checked by the operator before commissioning.
3.5 Personnel qualication
WARNING!
Risk of injury should qualication be insucient
Improper handling can result in considerable injury and
damage to property.
The activities described in these operating instructions
may only be carried out by skilled personnel who have the
Skilled personnel
Skilled personnel, authorised by the operator, are understood to be
personnel who, based on their technical training, knowledge of measure-
ment and control technology and on their experience and knowledge
capable of carrying out the work described and independently recognis-
ing potential hazards.
3. Safety
To Next Page
Loading...
