WIKA CPG1200 - Page 44

44 WIKA operating instructions, model CPG1200
EN
14603921.02 06/2023 EN/DE
7.4 Settings
7.4.1 Bluetooth
®
Via the Bluetooth
®
function, the CPG1200 can be connected via a PC or mobile
device. The presetting is “OFF”.
Bluetooth
®
“On” The Bluetooth
®
function is activated and the instrument can be
searched for and connected with via a PC or mobile device over
Bluetooth.
Bluetooth
®
“Off” The Bluetooth on the CPG1200 is switched off.
This function is only displayed if the Bluetooth
®
option has been ordered.
7.4.2 Language
The Language function shows a selection of the languages available on the CPG1200.
To change the instrument language, proceed as follows under “Menu” / “Measure
mode” / “Language”:
1. With the [LIGHT/▼] button or [ZERO/▲] button, select the desired language.
2. Confirm the setting by pressing the [MENU/◀▶] button.
⇒
The instrument moves back one menu level.
The input can be aborted with the [Home] button. The instrument exits the
menu and returns to the main display.
Press the [HOME] button in order to exit the menu.
7.4.3 Auto-off time
The Auto-off time function specifies the time after the last button was pressed or
values were last called up via the USB or Bluetooth
®
interfaces, after which the
CPG1200 switches off automatically.
The length of time until automatic switch-off can be selected from the fixed value “15
min”.
With the setting “Off”, the CPG1200 runs continuously and does not switch off
automatically. The instrument then remains active until the batteries are empty or the
instrument is switched off manually using the [ON/OFF] button.
If the switch-off time is activated and the logger is running, the logger has priority and
the switch-off time only starts after the logger process has been successfully completed.
Also, during a Bluetooth
®
transmission or through a log, the time is stopped and
restarted after completion of this.
7. Operation via menu functions