55WIKA operating instructions, model CPG1200
EN
14603921.02 06/2023 EN/DE
5. Put the battery cover on and screw it tight with the three screws.
▶
Tighten the upper screw first.
▶
Maximum tightening torque of the screws is < 0.4 Nm
Fig. 2 - Position of the battery compartment
If the instrument is not used for a long time (one month or longer), remove
the batteries.
Do not leave empty batteries in the instrument.
Dispose of batteries and rechargeable batteries properly, see chapter
10.3.2 “Disposal of batteries”.
Wear protective gloves!
Use protective gloves when damaged or leaking/leaked batteries must be
removed.
9. Maintenance, cleaning and calibration
To Next Page
Loading...
