WIKA CPG1200 - Page 57

57WIKA operating instructions, model CPG1200
EN
14603921.02 06/2023 EN/DE
9.4 Calibration
DAkkS calibration certificate, NIST, comparable certificates or official
certificates:
We recommend that the instrument is regularly calibrated by the manufacturer, with time
intervals of approx. 12 months. The default settings will be corrected if necessary.
The calibration label is attached at the side of CPG1200. For instruments with protective
case cap, it is located at the top beneath the protective cap.
Illustration examples:
Fig. 3 - CPG1200 with protective case
cap
Fig. 4 - CPG1200 without protective
case cap
9. Maintenance, cleaning and ... / 10. Dismounting ...
10. Dismounting, return and disposal
Personnel: Skilled personnel
Protective equipment: Protective gloves, safety goggles
Tools: SW 27 open-ended spanner or torque wrench
WARNING!
Physical injuries and damage to property and the environment
through residual media
Upon contact with hazardous media (e.g. oxygen, acetylene, flammable
or toxic substances), harmful media (e.g. corrosive, toxic, carcinogenic,
radioactive), and also with refrigeration plants and compressors, there is a
danger of physical injuries and damage to property and the environment.
▶
Wear the requisite protective equipment.
▶
Observe the information in the material safety data sheet for the
corresponding medium.
▶
Flush or clean the dismounted instrument (before storing it or following
use), in order to protect persons and the environment from exposure to
residual media.