WIKA operating instructions models DIH50, DIH52, DIH62
7
GB
14008548.03 05/2013 GB/D
2.3 Additional safety instructions for instruments per ATEX
WARNING!
Non-observance of these instructions and their contents may result in the loss
of explosion protection.
WARNING!
Do not use eld indicators with any damage to the exterior!
CAUTION!
■
Repairs are strictly prohibited.
■
Do not use displays presenting externally visible damage.
■
Observe the instructions for mounting and operation as well as the require-
ments for the use of the devices in hazardous areas.
2.4 Special hazards
WARNING!
Observe the information given in the applicable type examination certicate and
the relevant country-specic regulations for installation and use in hazardous
areas (e.g. EN/IEC 60079-14, NEC, CEC). Non-observance can result in serious
injury and/or damage to the equipment.
For further important safety instructions for instruments with ATEX approval, see
chapter 9 "Information on mounting and operation in hazardous areas".
WARNING!
For hazardous media such as oxygen, acetylene, ammable or toxic gases or
liquids, and refrigeration plants, compressors, etc., in addition to all standard
regulations, the appropriate existing codes or regulations must also be followed.
WARNING!
To ensure safe working on the instrument, the operating company must ensure
■
that suitable rst-aid equipment is available and aid is provided whenever
required,
■
that the operating personnel are regularly instructed in all topics regarding
work safety, rst aid and environmental protection, and know the operating
instructions, in particular the section on safety instructions.
2. Safety
To Next Page
Loading...
Need help?
General
