22 January, 2024 8 Rev. A-4
CARE AND MAINTENANCE
Clean the Mount by flushing away dirt with fresh water and/or wiping
down the assemblies with a clean, damp cloth. If used in a saltwater
environment, flushing with fresh water and drying after use is
recommended. If used extensively in a saltwater environment, lightly
lubricate stainless steel parts as needed.
Flip mechanisms that are not kept free from debris may bind, and
the assembly may not lock the mount into the deployed or stowed
position. Lubricate lightly as needed.
GENERAL SAFETY WARNINGS
n CAUTION n
When performing operations that could cause entanglement, make
sure the flip feature is not obstructed in any way.
To Next Page
Loading...