Need help?Do you have a question about the Wilden EOM P200 and is the answer not in the manual?
General safety warnings and cautions for pump operation and maintenance.
Specifies operating temperature ranges for various pump materials.
Explains the coding system for pump model identification.
Lists material codes for pump components and available options.
Details the flow pattern and operation of the diaphragm pump.
Describes the components and function of the air distribution system.
Provides dimensional data for the Polypropylene model.
Provides dimensional data for the PVDF model.
Dimensional drawings for the center ported Polypropylene model.
Dimensional drawings for the center ported PVDF model.
Performance curves and specifications for the rubber-fitted model.
Performance curves and specifications for the TPE-fitted model.
Performance curves and specifications for the reduced-stroke PTFE model.
Performance curves and specifications for the full-stroke PTFE model.
Chart showing suction lift capability based on inlet air pressure.
Recommendations for proper pump installation and site selection.
Guidance on pump operation, pre-lubrication, and maintenance.
Solutions for common problems like pump not running or slow.
Step-by-step guide for taking the pump apart.
Instructions for disassembling the air valve assembly.
Tips and torque specifications for reassembling the pump.
Detailed steps for correctly installing shaft seals.
Visual breakdown of pump components with part identifiers.
Detailed list of all pump parts with part numbers.
Table of elastomer options for diaphragms, seats, and balls.
General| Size | 2 inch |
|---|---|
| Max. Pressure | 125 psi (8.6 bar) |
| Discharge Size | 2 inch |
| Suction Size | 2 inch |
| Pump Type | Air-Operated Double Diaphragm Pump |
| Material | Polypropylene |
| Fluid Inlet/Outlet | 2 inch |
To Next Page
