Need help?Do you have a question about the Wilden PRO-FLO P8 and is the answer not in the manual?
Essential safety guidelines for pump operation, including eye protection and air supply.
Material temperature limits, chemical resistance, and potential chemical exposure risks.
Guidance on pump installation, tightening hardware, and maintenance procedures like flushing.
Breaks down the pump model code into components like materials, diaphragms, and valve options.
Illustrates the air-operated pumping cycle and fluid movement through the diaphragms.
Describes the air distribution system's role in controlling pump operation via its valve spool.
Technical drawing and table showing all key dimensions for the P8 Plastic pump model.
Performance data for Rubber-Fitted and TPE-Fitted P8 Plastic pumps, including flow and air usage.
Specifications for PTFE-Fitted P8 Plastic pumps, detailing flow rates and air consumption.
Performance curves for Ultra-Flexâ„¢-Fitted pumps and the critical suction lift capability chart.
Recommends optimal location, piping, and connection practices for efficient pump installation.
Advice on pump operation, lubrication, and periodic maintenance inspections for longevity.
Solutions for common issues like slow running, no flow, air valve freezing, and product in exhaust.
Step-by-step instructions for safely disassembling the pump's liquid and air sections.
Procedure for disassembling the air valve, including spool and bushing components.
Essential tips, lubrication guidance, and torque specifications for correct pump reassembly.
Detailed steps and tools required for the proper installation of pump shaft seals.
Visual representation and part breakdown for the Full-Stroke PTFE Diaphragm-Fitted pump.
Detailed listing of all parts with their corresponding part numbers (P/N) and quantities.
Table showing various elastomer options for diaphragms, valve seats, and O-rings.
General| Max Pressure | 125 psi (8.6 bar) |
|---|---|
| Pump Type | Air-Operated Double-Diaphragm |
| Max Solid Size | 0.375 inches (9.5 mm) |
| Air Inlet | 19 mm (3/4") |
| Materials | Aluminum, Stainless Steel, Polypropylene |
| Diaphragm Materials | Buna-N, EPDM, Viton |
| Air Inlet Size | 19 mm (3/4") |
To Next Page
