Wildfire MONTESE User Manual

USER INSTRUCTIONS
INSTALLATION INSTRUCTIONS
SERVICE INSTRUCTIONS
It is a regulaon that these instrucons be handed to the customer aer installaon is complete. It is
also the responsibility of the installaon engineer to ensure that the customer is able to fully operate
the appliance and is aware of any cleaning or maintenance requirements.
MONTESE GAS FIRE
MONTESE XE GAS FIRE
ELLIPSIS GAS FIRE
Model numbers: F-021XX1 MANUAL for use on Natural Gas (G20) at a supply pressure of 20 mbar in GB / I.E.
Model numbers: F-021XX2 SLIDE for use on Natural Gas (G20) at a supply pressure of 20 mbar in GB / I.E.
(XX denotes control type, & trim type)
P-XX1510 ISSUE1

Wildfire MONTESE Specifications

General

Brand	Wildfire
Model	MONTESE
Category	Indoor Fireplace
Language	English

Summary

Regulatory Information and Installation Requirements

Siting the Appliance

Fireplace Opening (Hole in the Wall Installation)

Checking the Flue

Connecting the Appliance to the Gas Supply

Check the operation of the appliance

Check the clearance of combustion products

Maintenance of the Appliance

Cleaning the Appliance

Removal / Replacement of Gas Carrying Components

Replacement of the Gas Control Valve

Steps to remove and replace the gas control valve.

Replacement of the Pilot

Steps to remove and replace the pilot assembly.

Replacement of the Burner Tray

Steps to remove and replace the burner tray.

Replacement of the Injector

Steps to remove and replace the injector.

OPERATING INSTRUCTIONS

MANUAL CONTROL OPERATION

Step-by-step guide for manual control operation.

SLIDE CONTROL OPERATION