Wilfa COOL 9 CONNECTED - Drainage System Setup

28
EN
INSTRUCTION MANUAL · AIR CONDITIONER
REMOVING COLLECTED WATER
When using the bottom drainage port to drain water, install the drainage pipe
before use. Poor drainage will affect normal operation of the unit.
Instruction for drainage pipe installation as follows:
1. Fix the drainage pipe clip on the right of rear side plate near drainage port
with a screw.
2. Remove the rubber plug from the bottom drainage port.
3. Put the drainage pipe into the bottom drainage port and screw it in.
4. Put the rubber plug into the other side of the drainage pipe, then x it in the
drainage pipe clip.
Botton drainage port
Screw
Drainage pipe clip
Botton drainage port
Rubber plug
Drainage pipe clip
Drainage pipe
Botton drainage port