Wilfa COOL 9 CONNECTED - ERROR CODE; Error Code Explanations

24
EN
INSTRUCTION MANUAL · AIR CONDITIONER
You can hear
water-owing
sound.
Were the unit just
turned on or off?
There is a sound of the
refrigerant inside the unit. This
is normal.
It sounds like
something is
breaking.
Were the unit just
turned on or off?
Heat expansion or shrinkage
for the panel due to change of
temperature can cause friction
sound. This is normal.
ERROR CODE
Error code Troubleshooting
F0, F1, F2, F4 Please contact our service-centre.
E8, H3 1. Check if the unit is in a high-temperature and high-humidity
Environment. If ambient temperature is too high, power off
the unit and then energize it for operation after the ambient
temperature drops to 35°C(95°F) below.
2. Check if the evaporator and condenser are blocked by some
objects; if yes, take away the objects, power off the unit and
then energize it for operation.
3. If the malfunction still occurs, please contact our service-
centre.
H8 1. Pour the water inside the chassis out.
2. If H8 still occurs, please contact our service-centre.
Warning:
• If there are following phenomenon, please turn off the air conditioner and
disconnect the power immediately, and then contact dealer immediately.
– Power cord is overheating or damaged.
– Abnormal sound during operation.
– Off-avor.
– Water leakage.
• Do not repair or ret the air conditioner by yourself.
• If operate the air conditioner! under abnormal condition, it may cause mal-
function, electric shock or re hazard.