Need help?Do you have a question about the Williams Sound T17 Series and is the answer not in the manual?
General| Brand | Williams Sound |
|---|---|
| Model | T17 Series |
| Category | Cell Phone |
| Language | English |
Explains how narrow-band receivers reduce interference using dual-conversion circuitry.
Details how narrow-band allows more channels in the same frequency band.
Discusses receiver sensitivity and its impact on operating distance.
Compares narrow-band sound quality to wide-band systems, noting trade-offs.
Explains receiver dynamic range and protection against strong signals.
Defines the capture effect in FM reception where the stronger signal is favored.
Overview of controls on the R19 receiver, including ear jack, tone, and volume.
Details front panel controls of the T17 transmitter, such as level and mic input.
Covers rear panel features of the T17 transmitter, including power and audio inputs.
Instructions for installing the T17 transmitter's antenna and connecting power and audio.
Guide to disabling DC voltage for specific microphone types via transmitter jumper.
Steps for setting up R19 receivers, including battery installation and testing.
How to use the tone control switch on R19 receivers to modify low frequencies.
Details on battery types, life, and charging for the PA system receivers.
Step-by-step guide for connecting and operating the CHG 200A battery charger.
Important tips for battery charging, life, and warnings for the charger.
Various strategies for managing and sanitizing audio receivers and earphones.
Instructions for connecting the optional ANT 005 coaxial antenna to the T17 transmitter.
Best practices for positioning a remote antenna for optimal signal strength.
Steps to diagnose and resolve issues with the transmitter's power indicator light.
Troubleshooting steps for when receivers do not produce any audio output.
Solutions for audio distortion and a continuously lit audio indicator light.
Steps to fix weak audio signals and a non-flashing audio indicator light.
Diagnosing and resolving buzzing or humming noises caused by RF interference.
Additional steps to address RF interference if initial troubleshooting fails.
Procedure for modifying the transmitter's internal switches to change operating frequencies.
Explanation of fixed crystals in receivers and available channel selections.
Details warranty coverage for the T17 transmitter, R19 receivers, and accessories.
Information on how to return products for repair and obtain authorization.
Comprehensive technical specifications for the PERSONAL PA System 400 Transmitter Model T17.
Detailed technical specifications for the PERSONAL PA System 400 Receivers Models R19, R19-4A, R19-6.
To Next Page