32
1-888-WILLOW-3
help.onewillow.com |
The Breast Pump has been tested and complies with the requirements for IEC 60601-1-2 4th Edition, Tables 4 through Table 9. See Guidance and
Declaration of Electromagnetic Immunity in the following pages in this Instructions for Use.
The assembled Breast Pump is a Type BF Applied Part according to IEC 60601-1.
GUIDANCE AND MANUFACTURER’S DECLARATION - ELECTROMAGNETIC EMISSIONS
Emissions Test Compliance Electromagnetic Environment – Guidance
RF emissions CISPR 11 Group 1 The Willow Go™ Breast Pump uses RF energy only for its internal
function. Therefore, its RF emissions are very low and are not likely
to cause any interference in nearby electronic equipment.
RF emissions CISPR 11 Group 1
The Willow Go™ Breast Pump is intended for use in the electro-
magnetic environment specied below. The customer or user of
the Willow Go™ Breast Pump should ensure that it is used in such
an environment.
RF emissions CISPR 11 Class B
The Willow Go™ Breast Pump is suitable for use in all establish-
ments, including domestic establishments and those directly
connected to the public low-voltage power supply network that
supplies buildings used for domestic purposes.
Harmonic emissions IEC 61000-3-2 Class A
Not applicable
Voltage uctuations / icker emissions IEC 61000-3-3 Complies
Not applicable
To Next Page
Loading...
