WILLYS
MODEL
"MB"
%-TON
4
x
4
GOVERNMENT
TRUCK
Willys
No.
A-6218
A-6200
NUMERICAL
INDEX
SERVICE TOOLS REQUIRED FOR TRANSFER CASE
Supplied by Kent-Moore Organization, Detroit, Mich.
K-M
NO.
.............
KMO-410
Transfer Case Main Shaft Snap Ring Removing Pliers..
HM-872-S-4
Adapter-Transfer Case Brake Drum Flange and Drive Flange Dust
Shield Remover-works with HM-872-S
........................
5-1375-5-1
Adapter-Transfer Case Main DriveGear Replacer. Operates with tool
J-1375-S
.....................................................
J-1375-S-2
Adapter-Transfer Case Brake Drum Assembly Replacer. Operates with
.................................................
toolJ-1375-S
5-1375-6
Sleeve required with J-13755-1 and J-1375-S-2 when replacing Transfer
Case
Main Drive Gear and Transfer Case Brake Drum..
..........
................
5-1748
Transfer Case Main Shaft Front Bearing Replacer..
...................
5-1749
Transfer Case Main Shaft Front Cone Remover..
5-1754
Transfer Case Replacer for Main Shaft Bearing Cups, Front and Rear.
...................
5-1755
Transfer Case Front Ball Bearing Cup Replacer..
......................
5-1756
Transfer Case Bearine C~D Oil Seal Re~iacer.
Transfer Case Oil Sed ~siembl~ Tool set for Shifter Shaft.
..........
.............................
Speedometer Gear Bushing Replacer..
Transfer Case Brake Drum and
Main Drive Gear PullerSet. Tool can
also be used as a hand press in connection with HM-914 for removing
Drive
Pinion Bearing Cone..
...................................
.......
Transfer Case Front and Rear Bearing Cap Oil Seal Remover..
................
Transfer Case Main Shaft Snap Ring Installing Set..
Transfer Case
Idler Gear Thrust Washer Locator..
...................
Transfer Case Idler Gear Shaft Drift and Shift Lever Pin Installing Pilot
...
Transfer Case Front and Rear Drive Flange Dust Shield Replacer..
...........
Transfer Case Front Bearing Cap Snap Ring Replacer Set.
SERVICE TOOLS REQUIRED FOR FRONT AND
REAR
AXLES
Supplied by Kent-Moore Organization, Detroit, Mich.
KMO-104
Universal Joint Snap Ring Removing Plien.
.......................
..................................................
5-270-1
Drive Handle.
...............................................
KMO-355
Feeler Gauge Set.
KMO-358
Drive Pinion Nut Wrench Socket and Hinge Handle..
...............
J-589-S
Drive Pinion Setting Gauge Set..
.................................
...........
5-789
Drive Pinion Axle and Transfer Unit Flange Holding Tool.
HM-872-S
Differential Side Bearing and Drive Pinion Flange Remover Set..
.....
...................
J-881-A
Universal Joint Assembly and Disassembly Tool.
HhI-914
Remover Plates for Bearing Cone next to Drive Pinion Head..
.......
5-943
Front Axle Outer Oil Retainer Remover..
..........................
SE-1066
Ring Gear
Back
Lash Checking Attachments
less
Dial Indicator
or
Feeler
Gauge
.............................................
SE-1094-5
Dial Indicator.
.................................................
J-1375-S
Front Pinion Shaft Flange and Axle Bhaft Replacer.
.................
5-1436
Wheel Bearing Cup, Oil Seal and Utility Puller..
...................
5-1735
Front Axle Shaft Flange Puller.
....................................
5-1742
Drive Pinion Oil Seal Remover.
...................................
5-1743
Drive Pinion Oil Seal and Front Hub Oil Seal Replacer..
............
5-1744
Front Axle Wheel Bearing Adjusting Nut Wrench and Handle.
......
5-1751
King Pin Bearing Cup Remover and Replacer, Fronthleshaft Outer
Oil
Seal Replacer, Transfer Case Output Shaft Bearing Remover..
..
5-1752
Front and Rear Axle Shaft Inner Oil Seal Remover..
................
5-1753
Front and Rear Axle Shaft Inner Oil Seal Replacer..
................
5-1753-3
Feed Screw for use with J-1753 Rear Axle Shaft Inner Oil Seal Replacer.
5-1761
Drive Pinion Bearing Cone Replacer for Cone mounted next to Pinion
Head
........................................................
5-1763
Differential Side Bearing Cone Replacer Head (works with 5-270-1
...................
................................
Handle).
.;
5-1764
Pair of Hooks lor Removing Front Spindle Lock Washer.
............
-
5-1765
Brake Eccentric Adjusting Tool.
..................................
5-1783
Differential Case Assemblv Studs (Set of
4).
.......................
5-1784
Drive Pinion Bearing cup Replacer Set.
:
..........................
5-1785
Drive Pinion Bearing Cup Removing Set.
..........................
To Next Page
Loading...
