Need help?Do you have a question about the Willys MB and is the answer not in the manual?
General| Displacement | 134.2 cu in (2.2 L) |
|---|---|
| Bore | 3.125 in (79.4 mm) |
| Stroke | 4.375 in (111.1 mm) |
| Compression Ratio | 6.48:1 |
| Fuel Type | Gasoline |
| Torque | 105 lb-ft (142 Nm) at 2, 000 rpm |
| Valvetrain | L-head |
| Fuel System | Carter carburetor |
| Engine Type | L-head (side-valve) I4 |
| Power Output | 60 hp (45 kW) at 4000 rpm |
Details the manual's purpose and scope, including supplementary information.
Details the entire process of disassembling, cleaning, inspecting, repairing, and assembling engine subassemblies.
Covers cleaning, inspection, and repair of the cylinder block, head, and oil pan.
Explains the process for disassembling, cleaning, inspecting, and repairing connecting rods and pistons.
Outlines cleaning, inspection, repair, and removal of the crankshaft assembly.
Details the procedure for installing the engine into the vehicle.
Provides the overall procedure for installing the engine into the vehicle.
Covers necessary adjustments and tests after engine installation.
Lists specific fits and tolerances for engine components.
Specifies torque values for various engine fasteners.
To Next Page
