Willys MB - CLEANING, INSPECTION, AND REPAIR.

TM 9-1803A
26-27
CLUTCH ASSEMBLY
Figure 48 - Pressure Plate Blocked Up in Press for
Disassembling or Assembling
b. Remove Clutch Pressure Spring Cups and Springs. Push the
clutch pressure spring cups and clutch pressure springs from the pres-
sure plate bracket with a screwdriver or punch (fig. 49). Remove
the clutch pressure plate return springs from the clutch pressure plate
bracket.
27. CLEANING, INSPECTION, AND REPAIR.
a. Cleaning. Clean all parts thoroughly in dry-cleaning solvent.
b. Inspection and Repair.
( 1) CLUTCH PRESSURE PLATE (fig. 47). A ridged, scored, radial
cracked, or burned pressure plate must be replaced.
(2) PRESSURE PLATE BRACKET (fig. 47). A distorted pressure
plate bracket or a pressure plate bracket with worn clutch fingers
must be replaced.
(3) CLUTCH PRESSURE SPRINGS. Place each clutch pressure
spring in a tension scale, and depress it to 19/I a inches (fig. SO).
If
67