1
ORDNANCE MAINTENANCE - ENGINE AND ENGINE ACCESSORIES FOR ‘h-TON
4x4 TRUCK (WILLYS-OVERLAND MODEL MB AND FORD MODEL GPW)
CHAPTER 1
Paragraph
Scope
1
MWO and major unit assembly replacement record ,,..__..,..._.
2
1.
The instructions contained in this manual are for the informa-
tion and guidance of personnel charged with the maintenance and
repair of the 4-cylinder engine used in the Willys MB and Ford GPW
?&ton 4 x 4 Trucks. These instructions are supplementary to field
and technical manuals prepared for the using arms.
This manual
does not contain information which is intended primarily for the
using arms, since such information is available to ordnance mainte-
nance personnel in lOO-series TM’s or FM’s.
This manual contains a description of, and procedure for
inspection, removal, disassembly, repair, and rebuilding of the engine.
c. TM 9-803 contains information and guidance for the using
arms and first and second echelons.
TM 9-1803B contains information for removal, inspection, re-
pair, rebuild, assembly, and installation of the power train and chassis.
e. TM 9-1825B contains information for the maintenance of the
Auto-Lite electrical equipment used on this vehicle.
f. TM 9-1826A contains information for the maintenance of the
Carter carburetor used on this vehicle.
l3.
TM 9-1827C contains information for the maintenance of the
Wagner hydraulic brake system used on this vehicle.
TM 9-1828A contains information for the maintenance of the
A. C. fuel pump used on this vehicle.
.
1. TM 9-1829A contains information for the maintenance of the
speedometer used on this vehicle.
5
This manual includes engine ordnance maintenance instruc-
tions from the following Quartermaster Corps lo-series technical man-
uals. Together with TM 9-803 and TM 9-1803B, this manual super-
sedes them :
(1) TM lo-1103,20 August 1941.
(2) TM lo-1207,20 August 1941.
(3) TM lo-1349,3 January 1942.
(4)
TM
4
To Next Page
Loading...
