WILLYS MODEL
"MB"
%-TON
4
x
4
COVERNMENT TRUCK
0700-73
TRANSMISSION
The transmission,
Fig.
1
isof the three speed,
Removal
of
Transmission
and
Transfer Case
eynchromesh type with synchronized 2nd and high
from
Engine
speed gears. See shifting diagram, Fig.
4
in Driver's
Instructions
Section.
1.
Remove front and rear ~rooeller
shafts
at
The transmission is bolted to the rear face of the
universal joint in
accordance Gith instructiona
flywheel bel1 Iiousing with four cap screws and is
under the "Propeller Shafts and
Universal
Joints".
supported on a rubber insulator at the center frame
cross
rnember which
is
the rear enrrine siipport or
2.
Disconnect speedometer cable
at
transfer
-
.
.
mounting. case.
FIG.
1-TRANSMISSION
To Next Page
Loading...
