Operating instructions:
Inspect your unit upon receipt for any freight damages in order to avoid later
claims.
Be sure to keep all original packaging. Original packaging will help to protect unit from
freight damage upon return.
If you discover any damages during inspection, please contact your supplier.
The unit is ready to be put in service immediately, connect the plug with
the socket.
Place the unit on the ground or on a very stable platform.
Plug the unit into a grounded alternating current circuit and switch the
unit on.
Maintenance
Disconnect the unit from the power supply before cleaning or
servicing.
Before each use the unit should be inspected for damage, clogged inlet or outlet,
or any excess build-up of foreign material.
When the unit is first turned on, check for excessive vibration, which could
indicate a major problem. If the unit vibrates, it must be carefully checked.
Technical Data:
Voltage 230 V ~
Frequency 50 Hz
Motor 0,56 kW
Current max. 2,41 A
Levels 3
Flow rate max. m³/h 1800 m³
Height mm 586 mm
Width mm 425 mm
Length mm 475 mm
Weight/kg 17,45 kg
Noise level 73,5 dB (A)
5 of 10
To Next Page
Loading...