English
Installation and operating instructions Wilo-Control CC-Booster 9
sponding pump and activation of the SSM. After
the cause of the fault has been rectified, it is nec
-
essary to acknowledge the fault.
The motor protection is also active in emergency
operation, and leads to deactivation of the corre
-
sponding pump.
In the CCe version, the pump motors protect
themselves by mechanisms integrated in the fre
-
quency converters. The error messages from the
frequency converters are handled in the switch
-
gear as described above.
6.2.3 Operation of the switchgear
Operating elements
• Main switch on/off (lockable in "Off" position)
•The touch display (graphics-capable) shows the
operating statuses of the pumps, the controller,
and the frequency converter. Additionally, all
switchgear parameters can be set using the
display.
The relevant operating elements appear context-
related on the touch display and can be selected
directly. Input fields for parameters are marked
with a line at the bottom.
The basic layout of the user interface is shown
below:
1 - Current user status display; access to login
page
2 - Navigation bar: Current screen display; press
for direct navigation
3 - Quicklinks/main menu:
a - Home (return to main menu screen)
b - Control (e.g. setpoints)
c - Interaction (e.g. HMI, BMS)
d - System (e.g. pump data, sensors)
e - Current alarms
f - Help (e.g. online manual)
4 - Pressing an arrow leads to the next operation
level
More information on operation can be found in the
online manual on the user interface
To Next Page
Loading...