Need help?Do you have a question about the Wilo Control EC-L1 Series and is the answer not in the manual?
General| Mains frequency | 50/60 Hz |
|---|---|
| Communication | Modbus RTU |
| Housing material | Plastic |
| Display | LCD |
| Ambient temperature | 0 °C to +40 °C |
| Storage temperature | -20 °C to +60 °C |
| Signal inputs | 0-10 V, 4-20 mA |
| Signal outputs | 0-10 V, 4-20 mA |
Explains manual purpose, reading, and product markings.
Lists scenarios where warranty and liability are voided.
Explains signal words, symbols, and their meaning in safety instructions.
Defines required qualifications for electrical, installation, and operator roles.
Details safety measures and regulations for electrical work on the device.
Outlines operator duties for safe and proper use of the switchgear.
Details the physical layout and main components of the switchgear.
Lists key technical specifications, operating conditions, and ratings.
Specifies required qualifications for personnel performing installation.
General guidelines, safety warnings, and environmental considerations for installation.
Critical safety and procedural steps for connecting electrical power.
Explains the automatic operation, pump sequencing, and control logic.
Details the 'drain' and 'fill' operating modes and their functions.
Explains how to navigate and use the device's menu system with the operating button.
Step-by-step guide for initial activation and startup after installation.
Procedures for setting up initial parameters like operating mode and pump settings.
How to set and verify motor current monitoring parameters for pump protection.
Steps to configure and start the automatic operation mode.
Required qualifications for performing shutdown procedures safely.
Detailed steps for safely switching off and decommissioning the switchgear.
Guidelines for cleaning the switchgear and checking component wear.
Explanation of the integrated maintenance indicator and its function.
How faults are displayed via LEDs, screen messages, and audible alarms.
Lists specific error codes, their causes, and recommended remedies.
Specific requirements for safe operation in potentially explosive areas.
Provides detailed wiring diagrams for different switchgear models.
To Next Page
