Need help?Do you have a question about the Wilo Economy and is the answer not in the manual?
General| Type | Submersible pump |
|---|---|
| Protection class | IP68 |
| Frequency | 50 Hz |
| Housing Material | Plastic |
| Impeller Material | Plastic |
| Application | Drainage |
| Mains connection | Single-phase |
| Voltage | 230 V |
Instructions are integral part of the product and must be kept available.
Installation personnel must have appropriate qualifications for the work.
Non-observance can result in injury to persons and damage to the pump/unit.
Adhere to directives for accident prevention and electrical safety.
Observe transport/storage instructions, protect against moisture, frost, heat, and mechanical damage.
DEA systems are used for boosting pressure in potable water, industrial, fire extinguishing, and irrigation systems.
Explains the coding system used for product identification and specifications.
The DEA is a compact system, tubed and ready to connect, for boosting water supply pressure.
Describes the main components: mechanical/hydraulic systems, pumps, control unit, and pressure vessel.
Explains how the system increases and controls water pressure using multiple pumps and control unit.
Covers noise levels, scope of delivery, and optional accessories for the system.
Specifies requirements for the installation room: technical, dry, well-ventilated, frost-proof, and with adequate space.
Covers hydraulic connections, pipes, foundation, hygiene, and dry-running protection systems.
Details on diaphragm pressure vessels, safety valves, and break tanks as accessories.
Requirements for installing non-pressurised break tanks, including connection and static design.
Details on compensators, flexible connection lines, and pressure reducers as accessories.
DANGER! Risk of fatal injury! Electrical connection must be made by approved engineers according to local regulations.
Checks before first system startup: wiring, pipe joints, filling, valve operation, and diaphragm pressure vessel pressure.
Details on the factory-set low water level protection (WMS) parameters.
Steps for switching on the system, setting control to automatic, and ensuring correct pressure build-up.
Comprehensive guide to identify and resolve common faults, their causes, and remedies for pumps and control systems.
To Next Page