Need help?Do you have a question about the Wilo P135 and is the answer not in the manual?
General| Brand | Wilo |
|---|---|
| Model | P135 |
| Category | Water Pump |
| Language | English |
Explains the closed-loop pressure control via transducer and controller, with duty/standby pump rotation.
Lists default parameters like Cold Fill Pressure, Low Pressure Alarm, and High Pressure Alarm.
Outlines essential checks including piping, wiring, earth bonding, and system filling before operation.
Details the process of calculating Cold Fill Pressure (CF) and setting system parameters.
Specifies maintenance tasks to be performed every 6 and 12 months for optimal unit performance.
Advises isolating power before performing maintenance as the pump may start automatically.
Provides a chart linking indications (e.g., Pump/s Don't Run) to possible reasons and recommended actions.
Illustrates the navigation and configuration of settings within the pressurisation unit's interface.
Presents the electrical schematic for the Comfort Series Pressurisation Unit, showing connections and components.
To Next Page