Installation and operating instructions WILO Mather and Platt – Sump Pumps 2
Disclaimer
WILO Mather and Platt is very grateful for your interest in its products. The basic objective of this
document is to provide instructions for maintaining and operating WILO Mather and Platt Sump Pumps.
Instructions are compiled for the person having a working knowledge of Sump Pumps and the pumps shall
be installed under expert supervision and guidance.
With this document WILO Mather and Platt does not accept any liability for inaccurate installation,
operation or maintenance of the product at site. The authorities that install and maintain the pump shall
be responsible for hassle free installation operation or maintenance of the product.
This document is prepared with at most care to ensure correct and accurate information, enabling the
user to have trouble free installation and operational support. However, there can be few areas for
improvement to make this document error free.
We welcome your valuable suggestions to make this document complete in all respects.
WILO Mather and Platt Pumps Pvt. Ltd.
Mumbai-Pune Road, Chinchwad,
Pune- 411 019, Maharashtra (India)
Tel: +91 20 27442100/1/2/3/4,
Toll Fee Service: 1-800-266-8866
Fax: +91 2027442111
service.in@wilo.com
www.wilo.in
To Next Page
Loading...
