To Next PageTo Next Page
Need help?Do you have a question about the Wilo PW-175E and is the answer not in the manual?
General| Motor power | 0.37 kW |
|---|---|
| Voltage | 230 V |
| Frequency | 50 Hz |
| Protection class | IP44 |
| Max Liquid Temperature | 60°C |
| Connection Size | 1 inch |
| Housing Material | Cast Iron |
| Impeller Material | Noryl |
| Weight | 6.5 kg |
| Power Consumption | 0.37 kW |
Introduction to the electric well pump and its models.
Details the specific pump models covered in the manual.
Instructions for safe earth wire connection to prevent electric shock.
Guidance on avoiding dry running, other liquids, freezing, and environmental exposure.
Information on temperature, water quality, and voltage limits.
Recommendation for using a sand filter for certain conditions.
Diagram and labels identifying components of the PW-175E model.
Diagram and labels identifying components of the PW-175EA model.
Details power, output, head, flow rate, and pressure switch settings.
Guidance on matching suction lift to pipe distance and considering dry seasons.
Advice on minimizing pipe resistance and ensuring a stable foundation.
Selecting a location for easy checking and repair.
Minimizing elbows to reduce water resistance and prevent leaks.
Understanding suction head limits and using standard pipe sizes.
Importance of priming water to prevent pump damage.
Procedure for handling a pump that may not start after a long period.
Step-by-step guide for priming and starting the pump.
Schematic showing electrical connections for the PW-175E model.
Schematic showing electrical connections for the PW-175EA model.
Graphical representation of pump performance characteristics.
Diagnosing and resolving problems with the motor not starting.
Addressing causes for water not being pumped, including low voltage and check valve problems.
Resolving issues like frequent thermal protector trips or air ingress.
Fixing water leaks and impeller damage.
