Need help?Do you have a question about the Wilo P235 and is the answer not in the manual?
General| Voltage | 230 V |
|---|---|
| Protection class | IP 68 |
| Frequency | 50 Hz |
| Type | Submersible pump |
| Connection Size | 1 1/4" |
Default values for key parameters like Cold Fill Pressure, Low Pressure Alarm, and High Pressure Alarm.
Activation of alarm due to low water level in the break tank, preventing pump operation.
Alarm triggered when system pressure drops below the LP setting, with audible and visual alerts.
Alarm triggered when system pressure exceeds the HP setting, with audible and visual alerts.
Alarm activated if pumps start too frequently within a set period, stopping the pumps.
Formula and guidance for calculating the required Cold Fill Pressure based on building height.
Entering password to adjust settings like CF, LP, and HP pressures according to site conditions.
Advisory to isolate power before performing maintenance as pumps may start automatically.
Visual guide illustrating the sequence for navigating menus and configuring unit parameters.
Schematic illustrating the electrical connections for pumps, sensors, and control outputs.
To Next Page