To Next PageTo Next Page
Need help?Do you have a question about the Wilo star z 15 tt and is the answer not in the manual?
General| Voltage | 230 V |
|---|---|
| Maximum operating pressure | 10 bar |
| Frequency | 50 Hz |
| Protection class | IP42 |
| Housing Material | Brass |
| Type | Circulating pump |
| Fluid temperature range | 2°C to 110°C |
Read through these instructions completely before attempting installation.
Important safety information is identified with specific symbols like Danger, Warning, Caution.
The pump must only be installed and connected by qualified personnel.
Key regulations that must be observed during installation include accident prevention and local standards.
Explains the designation of the pump series, nominal width, and timer/thermostat features.
Details the type of connections used for the pump, such as screwed connections.
Provides essential technical specifications like mains voltage, protection class, and temperature range.
Lists all items included with the pump delivery, such as cable, insulation shell, and gaskets.
Describes the operational features: Timer function, Temperature control system, and Thermal disinfection.
Explains how to navigate and use the pump's menu system via the red button for settings.
Guidance on choosing a weatherproof, frost-free, and accessible installation site for the pump.
Instructions for connecting the pump electrically, emphasizing safety precautions and permanent power supply.
Step-by-step guide to setting the current time on the pump's digital display.
Instructions for programming the pump's switch-on and switch-off times.
Guide to setting the desired temperature for the return circuit for optimal operation.
Instructions for cleaning the exterior of the pump using a slightly moistened cloth.
Warning and steps for safely replacing the pump's motor head, including cooling down advice.
Information on ordering replacement service motors from a trade specialist.
