To Next PageTo Next Page
Need help?Do you have a question about the Wilo Star-Z NOVA T and is the answer not in the manual?
General| Frequency | 50 Hz |
|---|---|
| Max Flow Rate | 0.4 m³/h |
| Max Liquid Temperature | 95 °C |
| Housing Material | Brass |
| Shaft Material | Ceramic |
| Integrated Timer | Yes |
| Integrated Thermostat | Yes |
| Protection Class | IP 42 |
| Max. Operating Pressure | 10 bar |
| Motor Protection | Thermal overload protection |
| Type | Circulating Pump |
| Application | Domestic hot water circulation systems |
| Power Supply | 230V, 1~, 50Hz |
| Max Head | 1 m |
| Fluid Temperature | 3 … +95 °C |
| Bearing Material | Carbon, metal impregnated |
General advice on reading and following safety instructions.
Explains danger, warning, caution symbols and notices.
Specifies required qualifications for installation and use of the device.
Lists regulations that must be observed during installation.
Guidelines on modification, spare parts, and handling transport safety.
Details safety precautions related to electrical shock hazards.
Explains the designation of the pump model and its features.
Describes the connection types and specifications for the pump.
Lists the technical specifications and operating parameters of the pump.
Specifies the intended use of the circulator for drinking water.
Explains time switching and temperature control functionalities.
Details the thermal disinfection function and its operation.
Explains how the pump handles power failures and maintains settings.
Describes how to navigate the menu using the operating button and controls.
Explains the pump's valves and the automatic blocking protection feature.
Shows what information is displayed in the standard mode after exiting the menu.
Covers site selection, pump positioning, and motor head assembly.
Details procedures for removing the motor head and connecting the pipework.
Explains the safe procedure for connecting the pump to the power supply.
Guides on filling the system and venting air from the pump.
Step-by-step guide to setting the current time on the pump.
Instructions for programming the pump's on/off switching times.
Details how to set the desired return water temperature.
Explains how to configure the pump for continuous operation.
How to clean the pump exterior and display.
Instructions and warnings for replacing the motor head.
Lists fault codes, causes, and corresponding remedies for pump issues.
Troubleshooting steps for when the pump fails to start or produces noise.
Guidelines for environmentally friendly disposal of the product.
