Wilo Star-Z NOVA T - Setting the Time Switching Function

Settings
20 WILO SE 05/2021
English
6.2 Setting the time switching function
To guarantee a DVGW compliant setting,
3 switching times are set at the factory:
1st switching time (on – off): 04:00 – 09:00
2nd switching time (on – off): 11:00 – 13:30
3rd switching time (on – off): 15:00 – 23:30
1.
2. Select the time switching
function (flashes).
+
3. Selection (flashes).
+
4. Set the hour for the first start-up
time.
Means: switching time, off.
+
5. Set minutes for the first switch-
on time.
6. Set hours for the first switch-off
time.
7. Set minutes for the first switch-
off time.
8. Repeat steps 4 to 7 for the switch-on or
switch-off times 2 and 3.
Warns about a non DVGW-compliant setting
and appears when the daily switch-off time is
over 8 hours.
9. Select the standard display.
+
5sec.
5sec.
-- : --
AA2