Wilo Star-Z NOVA T - Setting the Temperature Control

Maintenance
22 WILO SE 05/2021
English
6.4 Setting continuous duty
7 Maintenance
Cleaning Clean the outside of the pump with a slightly
damp cloth only. Do not use detergents.
Replacing the motor head
1.
2. Select the time switching
function (flashes).
+
3. Select (flashes), to switch off the
time switching function.
+
4. Select temperature control
(flashes).
+
5. Select to switch off temperature
control.
6. Select “off” (flashes) to switch
off the thermal disinfection
function.
+
7. Select the standard display.
+
5sec.
5sec.
5sec.
no °C
CAUTION: Never clean the display with
aggressive fluids, as it can become scratched or
opaque.
WARNING: When removing the motor
head or pump, hot fluid may be expelled under
high pressure. Allow the pump to cool down
first.
Close the stop valves before removing the pump
 Page 15.