Wilo star z 15 tt - Installation; Mechanical installation

Installation and operating instructions Wilo-Star-Z 15 TT 21
English
Installation
Symbols The following symbols are displayed in the menu:
5 Installation
5.1 Mechanical installation
Installation site Choose a weatherproof, frost-free, dust-free and well-venti-
lated room for the installation. Make sure that the installation site
is easily accessible.
• Menu clock
Set the current time
• Menu timer function
Set the parameters.
- Set the 3 possible switch-on times.
- Set the 3 possible switch-off times.
- Timer function switched off.
- Timer function switched on.
• Menu temperature control
Set the parameters.
- Switch thermal disinfection on/off.
• Basic display (exit menu)
The following are displayed alternately on
the basic display:
- time and set temperature of the tempera-
ture control system.
- Thermal disinfection ON (does not appear
if the thermal disinfection is switched off)
-
11:30
65 8C
Danger: Before starting work, make sure that the pump
has been disconnected from the power supply.
Caution: Dirt can cause pump failure. Flush the pipe sys-
tem before installation.