Wilo star z 15 tt - Page 24

24 WILO AG 02/2008
English
Settings
6.2 Set the timer function
6.3 Setting the temperature control system
Note: There is no automatic summer/winter time switch-
over.
1.
2. Select timer function (flashes).
+
3. Select (flashes).
+
4. Set hours for the first switch-on
time.
Means: timer switched off.
+
5. Set minutes for the first switch-on
time.
6. Set hours for the first switch-off
time.
7. Set minutes for the first switch-
off time.
Warns against a non-DVGW compliant setting
and appears if the switch-off time is more than
8hours.
8. Repeat steps 4 to 7 for switch-on and switch-off
times 2 and 3.
9. Select the basic display.
+
5 sec.
5 sec.
-- : --
AA 2
1.
2. Select control system (flashes).
+
3. Set temperature.
Selection range 40-70 °C.
Means that the temperature con-
trol system is switched off.
The pump continues to run
independently of the return
temperature.
+
5 sec.
5 sec.
65 8C
O8