Wilo STRATOS GIGA - Error Type B

English
Installation and operating instructions Wilo-Stratos GIGA 61
If type A or D errors occur, proceed as follows to acknowledge
(Fig. 53):
• To change to menu mode, press the red button.
Menu number <6.0.0.0> flashes on the display.
• Press the red button again.
Menu number <6.0.0.0> appears steady on the display.
The time remaining until the error can be acknowledged is displayed.
• Wait until the remaining time is up.
The time until manual acknowledgment is always 60 seconds for error
types A and D.
• Press the red button again.
The error is acknowledged, and the status page is displayed.
11.3.2 Error type B
Error type B (Fig. 54):
If type B errors occur, proceed as follows to acknowledge:
• To change to menu mode, press the red button.
Menu number <6.0.0.0> flashes on the display.
• Press the red button again.
Menu number <6.0.0.0> appears steady on the display.
On the units display, the current incidence (x) as well as the maximum
incidence of the error (y) are displayed in the format “x/y”.
Fig. 53: Acknowledge error type A or D
6.0.0.0
6.0.0.0
6.0.0.0
S1/1
1/1 S
0
60
12.3
E000
Fig. 54: Error type B, diagram
1
2
4
7
8
3
5 6
9
Program
step/query
Contents
1 • Error code is displayed
• Motor off
•Red LED on
2 • Error counter is incremented
3 Error counter > 5?
4 • SSM is activated
5 > 5 minutes?
6 > 5 minutes?
7 Error acknowledged?
8 End; auto control resumes
9 Error E021 > 1 minute
yes
no