Installation and operating instructions Wilo-Stratos/-D/-Z 29
English
LC display Setting
After another 5 s, the display switches to
the menu level 3
The HV display appears (works setting).
Rotating the control button will switch
the setting to the cooling/air-condition-
ing (AC) operating mode.
The setting is stored.
The next menu is displayed.
The display “m ft” appears, for which the
unit that is set will be flashing. (Works
setting [ft]).
Rotating the control button will change
the setting to [m]. The new setting will
begin flashing.
The new setting is saved by briefly press-
ing the button.
Display returns to basic setting .
If no setting is made in the subsequent menu within 30 s, then the display will once
again show the basic setting .
To Next Page
Loading...
