Wilson Benesch Act - The A.C.T. Technical Specifications

14
The A.C.T.
Technical Specifications
Description 2.5 way, true linear phase, free space, ported enclosure, floorstanding
monitor
Drive units 1 x 170mm (7 in) Wilson Benesch Tactic bass unit
1 x 170mm (7 in) Wilson Benesch Tactic bass / mid range unit
1 x 25mm (1 in) Soft dome, hand painted silk, ultra linear Wilson
Benesch specification tweeter
Low frequency
loading
Bessel alignment of fourth order reflex. Double chamber, differential tuning
Frequency range
-6dB at 32Hz and 30kHz
-3dB at 35Hz and 25kHz
Frequency
response
35Hz to 24kHz +- 2dB on axis
Sensitivity 88dB spl at 1metre on axis. 2.83V input
Impedance 6 Ohms nominal, 4 ohms minimum
Crossover First order bass roll-off
Second order mid range and tweeter crossover
Selected polypropylene capacitors and air cored inductors are used
throughout
Crossover
frequencies
500 Hz / 5kHz
Internal wiring Multi stranded, silver plated copper, PTFE jacketed cable harnesses
Soldered connections throughout
Shortpath P.C.B. design on mid range and tweeter crossover
Link wires supplied for single or bi-wire applications.
Input connections bi-wireable, in-house machined gold plated copper alloy terminals
Power handling 200W peak unclipped programme
Maximum spl 111dB at 1 metre
Dimensions Height 1080mm
Width 230mm
Depth 370mm
Internal volume 42.5 litres
Net weight 44kg
Finishes available
Polymer: Black and Regal Silver.
(NB: ACT top will be in high build piano gloss)
Wood Satin: Nat Cherry, Maple, Oak (NB: ACT top will be wood finish)
Wood Gloss: Birds Eye Maple, Burr Walnut, Red Tulip, Red Birds Eye
Maple, White Gloss (NB: ACT top will be in high build piano gloss)