Wilson Benesch Act - Curve Technical Specifications

9
Curve
Technical Specifications
Curve
Technology Advance Composite Technology cabinet construction (A.C.T.
Monocoque
Advanced design allies 24 different materials to achieve the ultimate
solution
Tactic advanced dynamic drive unit technology
Full metal bracing and baffle arrangement
Description 2.5 way, true linear phase, free space, ported enclosure, floorstanding
monitor
Drive units 1 x 170mm (7 in) Wilson Benesch Tactic bass unit
1 x 170mm (7 in) Wilson Benesch Tactic bass / mid range unit
1 x 25mm (1 in) Soft dome, hand painted silk, ultra linear Wilson
Benesch tweeter
Low frequency
loading
Bessel alignment of fourth order reflex. Double chamber, differential
tuning
Frequency range
-6dB at 32Hz and 30kHz
-3dB at 35Hz and 25kHz
Frequency
response
35Hz to 24kHz +- 2dB on axis
Sensitivity 88dB spl at 1metre on axis. 2.83V input
Impedance 6 Ohms nominal, 4 ohms minimum
Crossover
frequencies
500 Hz / 5kHz
Crossover First order bass roll-off
Second order mid range and tweeter crossover
Selected polypropylene capacitors and air cored inductors are used
throughout
Input connections
bi-wireable, in-house machined gold plated copper alloy terminals
Power handling 200W peak unclipped program
Maximum spl 109dB at 1 metre
Dimensions Height 910mm
Width 230mm
Depth 370mm
Internal volume 42.5 litres
Net weight 26kg
Finishes
available
Polymer: Black and Regal Silver.
Wood Satin: Nat Cherry, Maple, Oak.
Wood Gloss: Birds Eye Maple, Burr Walnut, Red Tulip, Red Birds Eye
Maple, White Gloss.