EasyManuals Logo

Wilson Electronics SIGNALBOOST MobilePro User Manual

Wilson Electronics SIGNALBOOST MobilePro
12 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #6 background imageLoading...
Page #6 background image
5
Installing a Wilson Outside Antenna on a Vehicle
To receive the best cell signal, select a location in the center of the vehicle’s roof 12 inches
away from any other antennas and free of obstructions.
Follow the speci c antenna installation instructions included with the outside antenna (sold
separately except for certain kits).
The outside antenna must be installed
vertically. Signal performance will be
degraded if the antenna is not vertical.
The antenna cable may be run through the
door to the ampli er.
For a more professional-looking installation,
the antenna cable may be run under the
door seal. Carefully pull down the door
seal. Run the cable through the seal
and push the seal back into place. This
prevents constant wear and tear on the
cable as the door opens and closes.
Optional Magnet-
Mount Antenna
Shown
Carefully
Pull Down
Door Seal
Run Cable
Under
Seal
Warning: The outside antenna and
ampli er must have a separation of at least 8
inches from all persons during normal operation.
!

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Wilson Electronics SIGNALBOOST MobilePro and is the answer not in the manual?

Wilson Electronics SIGNALBOOST MobilePro Specifications

General IconGeneral
BrandWilson Electronics
ModelSIGNALBOOST MobilePro
CategoryAmplifier
LanguageEnglish

Related product manuals