Contents:
Accessories ...............................................................1
How it Works ..............................................................2
Vehicle Installation Diagram ..................................................2
Install the Outside Antenna ...................................................2
Power up the Wilson Electronics Sleek 4G ......................................3
Adjusting the Sleek 4G
Arms .................................................4
Understanding the Sleek 4G Lights ............................................4
Troubleshooting ............................................................4
In-Building Installation .......................................................5
Warnings ..................................................................6
About Wilson Electronics .....................................................6
Signal Booster Specications ........................................Back Cover
To boost your phone’s signal power, the phone must be placed in the Sleek 4G cradle. For best
results, use a Bluetooth
®
headset or hands free device, while the phone remains in the Sleek 4G.
Cell Phone Signal Booster with Built-in Antenna
Appearance of device and accessories may vary.
Note: This manual contains important safety and operating information. Please read and follow the
instructions in this manual. Failure to do so could be hazardous and result in damage to your Sleek.
U.S. Patent Nos. – D626,953; 7,684,838; 7,221,967; 7,729,669;
7,486,929; 7,729,656; 7,409,186; 7,783,318
To Next Page
