© by WilTec Wildanger Technik GmbH Seite 24
http://www.wiltec.info
Introduction
Thank you for purchasing this quality product. To minimize the risk of injury by
means of fire or electric shock we urge that our clients take some basic safety
precautions when using this device. Please read the operation instructions
carefully and make sure you have understood its content.
Always use a grounded power connection with the appropriate mains voltage. You
can find the corresponding mains voltage on the type plate. If you have any doubts
about the connection being grounded, have it checked by a qualified professional.
Never use a faulty electric cable.
Do not inspect the electrical part of the pressure pond filter in a wet or damp envi-
ronment or when you are wet yourself and protect it from direct sunlight. Install this
device in a safe location so that nobody can step on the cable, fall over or damage it.
Make sure additionally you provide sufficient cooling through the ambient air and
avoid heat accumulation. Disconnect the power plug before cleaning it and use only
a damp cloth for cleaning.
The electric part of the device contains no parts that can be inspected or serviced by
the user. Leave the maintenance, adjustment and repair to qualified technical per-
sonnel. In case of unauthorised intervention the 2-year warranty is no longer valid!
Keep these operation instructions safe.
To Next Page
Loading...
